How to Get Super Suction in Luigi’s Mansion 3

Written by

Super Suction is a late-game weapon upgrade for Poltergust G-00 where it will increase the suction power exponentially, allowing you to massively remove all obstacle and destroy destructible materials.

However, in order to use this Super Suction, you need to find a plug for it to work, an electrical socket that can be found on some of the selected floors in the game.

Table of Contents

  1. How to Get Super Suction
  2. Toad Video Footage
  3. Finding Missing Toad
  4. Finding Missing Part
  5. Super Suction Upgrade

In this guide, we will help you walk-through how to get Super Suction in Luigi’s Mansion 3.

How to Get Super Suction

When you’ve reached Floor 12 in Luigi’s Mansion 3, E. Gadd will call you using the Virtual B-00. When you answer the call, he will ask you to go back to the labs as something bad happens.

Go back to the lab by going to Menu > Lab.

He then tells you that about a problem where toad went missing as he asked toad to look for some parts to upgrade Luigi’s Poltergust.

Toad Video Footage

E. Gadd will then show you the last video footage of Toad running from a ghost, and it shows the part for Poltergust G-00 was dropped and toad went missing.

You’ll then asked to look for Toad and the missing part.

Finding Missing Toad

You can find Toad at the Floor B2, you need to reach the Storage Room area. Toad is on the other side of the room at the left corner.

First, you need to Vacuum the area until the Red Valve lights on. Then remove any obstacle until the Green Pipe Hole shows up. Use the Gooigi to send to the Green pipe on the left.

Now, Gooigi will be inside the other left room. You’ll notice a yellow moving box on the corner.

Open the moving box and toad will be free.

To send back toad to Luigi, use Pultergust to propel him to the other side.

E. Gadd will then call you to find the next missing, the part for Poltergust G-00.

Finding Missing Part

For the missing part, it is just located in the next right room. Open the door on the right and the missing part is just located in this area (see screenshot below).

Here is a closer look.

To go to that side, stand to the movable bridge at the center chamber and use Gooigi to operate the movable bridge.

You can now go to the missing part.

Use Poltergust to suck toad and throw it to the missing part.

After that, you’ll be able to get the Part and E. Gadd will call you, congratulating you for finding the missing part.

Super Suction Upgrade

Now that you have Toad and the missing part, you just need to go back to the lab and proceed with the Super Suction upgrade.

There you go! You have your Poltergust G-00 upgrade to Super Suction. But note! you can only use Super Suction when there is an electrical socket.

Article Tags:
Article Categories:
Guide · How To · Special

Leave a Reply